A compartment and metapopulation model of Rocky Mountain spotted fever in southwestern United States and northern Mexico.

Rocky Mountain spotted fever (RMSF) is a fatal tick-borne zoonotic disease that has emerged as an epidemic in western North America since the turn of the 21st century. Along the US south-western border and across northern Mexico, the brown dog tick, Rhipicephalus sanguineus, is responsible for spreading the disease between dogs and humans. The widespread nature of the disease and the ongoing epidemics contrast with historically sporadic patterns of the disease. Because dogs are amplifying hosts for the Rickettsia rickettsii bacteria, transmission dynamics between dogs and ticks are critical for understanding the epidemic. In this paper, we developed a compartment metapopulation model and used it to explore the dynamics and drivers of RMSF in dogs and brown dog ticks in a theoretical region in western North America. We discovered that there is an extended lag-as much as two years-between introduction of the pathogen to a naïve population and epidemic-level transmission, suggesting that infected ticks could disseminate extensively before disease is detected. A single large city-size population of dogs was sufficient to maintain the disease over a decade and serve as a source for disease in surrounding smaller towns. This model is a novel tool that can be used to identify high risk areas and key intervention points for epidemic RMSF spread by brown dog ticks.

2023-2024 American Board of Orthodontics practice analysis study: Part 1.

As a specialty board, the American Board of Orthodontics (ABO) serves to protect the public and the orthodontic specialty by certifying orthodontists. The demonstration of commitment to lifelong learning and self-improvement is critical to achieving the highest level of patient care. The ABO completed a practice analysis study in 2023 to ensure all examinations represent current assessments of proficiency in orthodontics at a level of quality that satisfies professional expectations. The practice analysis is essential to providing a demonstrable relationship between the examination content and orthodontic practice and provides a critical foundation for ABO's examination programs.

Relapse and failure rates between CAD/CAM and conventional fixed retainers: a 2-year follow-up of a randomized controlled clinical trial.

BACKGROUND: Retention has been always considered a major challenge in orthodontics. Recently computer-aided design/computer-aided manufacturing (CAD/CAM) fixed retainers (FRs) have been introduced as a marked development in retainer technology, offering potential advantages. OBJECTIVE: The objective of this study was to compare the differences in relapse and failure rates in patients treated with FRs using CAD/CAM technology, lab-based technique, and chairside method. TRIAL DESIGN: A double-blinded, prospective, randomized controlled clinical trial was conducted over a 2-year period at a single centre. INTERVENTIONS: These patients were divided into three groups: CAD/CAM group with multistranded Stainless Steel wires (CAD/CAM, n = 14), lab group with the same multistranded wires (lab, n = 15), and a chairside group with Stainless Steel Ortho-FlexTech wires (chairside, n = 14). OUTCOMES: Inter-canine width (ICW) and Little's irregularity index were digitally measured from scans at the orthodontic debonding (T1), 6-month retention (T2), 1-year retention (T3), and 2-year retention (T4) visits. All forms of failure were documented and analyzed. RANDOMIZATION: Participants were randomly assigned to the three groups using online randomization software (randomization.com) by a statistician who was not involved in the study. BLINDING: Patients were blinded in terms of the FR group to which they were each randomly assigned. The principal investigator was blinded upon data analysis since patients' records were coded to minimize observer and measurement bias. RESULTS: Initially 81 patients were assessed for eligibility. Seventy-five patients were randomly allocated into the three study groups. After 2-year follow-up, 43 patients came back for the follow-up and were analyzed. The CAD/CAM group showed significantly less reduction in ICW compared to the chairside group at all time intervals (P < .05) and compared to the lab group at 6 months (P = .038). In terms of LII, the CAD/CAM group exhibited significantly less change than the chairside and lab groups at all time intervals (P < .05). The CAD/CAM group had the lowest failure rate (21.4%), followed by chairside group (28.6%) and then lab group (33.3%), however the differences were insignificant. No harms were observed in the current study. CONCLUSION: Within 2 years of fixed retention, CAD/CAM FRs showed significantly less relapse than lab-based and chairside FRs. However, there was no significant difference in failure rates among the groups. TRIAL REGISTRATION: NCT05915273.

Forces and moments generated by 3D direct printed clear aligners of varying labial and lingual thicknesses during lingual movement of maxillary central incisor: an in vitro study.

OBJECTIVE: The objective of this study was to measure the forces and moments exerted by direct printed aligners (DPAs) with varying facial and lingual aligner surface thicknesses, in all three planes of space, during lingual movement of a maxillary central incisor. MATERIALS AND METHODS: An in vitro experimental setup was used to quantify forces and moments experienced by a programmed tooth to be moved and by adjacent anchor teeth, during lingual movement of a maxillary central incisor. DPAs were directly 3D-printed with Tera Harz TC-85 (Graphy Inc., Seoul, South Korea) clear photocurable resin in 100-µm layers. Three multi-axis sensors were used to measure the moments and forces generated by 0.50 mm thick DPAs modified with labial and lingual surface thicknesses of 1.00 mm in selective locations. The sensors were connected to three maxillary incisors (the upper left central, the upper right central, and the upper left lateral incisors) during 0.50 mm of programmed lingual bodily movement of the upper left central incisor. Moment-to-force ratios were calculated for all three incisors. Aligners were benchtop tested in a temperature-controlled chamber at intra-oral temperature to simulate intra-oral conditions. RESULTS: The results showed that increased facial thickness of DPAs slightly reduced force levels on the upper left central incisor compared to DPAs of uniform thickness of 0.50 mm. Additionally, increasing the lingual thickness of adjacent teeth reduced force and moment side effects on the adjacent teeth. DPAs can produce moment-to-force ratios indicative of controlled tipping. CONCLUSIONS: Targeted increases in thickness of direct 3D-printed aligners change the magnitude of forces and moments generated, albeit in complex patterns that are difficult to predict. The ability to vary labiolingual thicknesses of DPAs is promising to optimize the prescribed orthodontic movements while minimizing unwanted tooth movements, thereby increasing the predictability of tooth movements.

Evaluation of enamel thickness of mandibular incisors.

OBJECTIVE: To measure enamel thickness at the proximal surfaces of the mandibular incisors, using micro-computed tomography (micro-CT) scans. MATERIAL AND METHODS: Forty-one single-rooted mandibular incisors were selected and analyzed according to anatomical characteristics, to form three groups: Group 1 - central incisors (n = 18); Group 2 - right lateral incisors (n = 10); and Group 3 - left lateral incisors (n = 13). First, enamel thickness at the proximal contact areas of the mandibular incisors was measured. Second, the mesial and distal surfaces of the lateral incisors were compared. Finally, the relationship between the tooth width and the mean enamel thickness was determined. Each tooth was scanned with a micro-CT scanner, and the image was processed with SCANCO micro-CT onboard analysis software. RESULTS: There were no statistically significant differences in mean enamel thickness between the mesial and distal surfaces for each lateral incisor, or between contralateral lateral incisors. In all surfaces analyzed, the upper zones had statistically significantly thinner enamel (0.52 ± 0.10 mm) when compared to the middle and lower zones (0.60 ± 0.08 mm and 0.59 ± 0.08 mm, respectively). There was no correlation (r =0.07) between enamel thickness of the mandibular incisor and the tooth width. CONCLUSIONS: The enamel thickness of the mandibular incisors is similar on the mesial and distal surfaces, with the thinnest layer located at the upper zone.

Spatio-temporal and transmission dynamics of sarcoptic mange in an endangered New World kit fox.

Sarcoptic mange poses a serious conservation threat to endangered San Joaquin kit foxes (Vulpes macrotis mutica). After first appearing in Bakersfield, California in spring 2013, mange reduced the kit fox population approximately 50% until the epidemic ended with minimally detectable endemic cases after 2020. Mange is lethal and thus, with such a high force of infection and lack of immunity, it remains unclear why the epidemic did not burn itself out rapidly and how it persisted so long. Here we explored spatio-temporal patterns of the epidemic, analyzed historical movement data, and created a compartment metapopulation model (named "metaseir") to evaluate whether movement of foxes among patches and spatial heterogeneity would reproduce the eight years epidemic with 50% population reduction observed in Bakersfield. Our main findings from metaseir were that: 1) a simple metapopulation model can capture the Bakersfield-like disease epidemic dynamics even when there is no environmental reservoir or external spillover host, 2) the most impactful parameter on persistence and magnitude of the epidemic is the projection, ß/αß (transmission over decay rate of transmission over space), 3) heterogeneity in patch carrying capacities changes the critical value of the projection needed to achieve an epidemic but makes little difference to epidemic persistence time, and 4) the epidemic is relatively insensitive to birth rates and density vs. frequency-dependent transmission. Our model can help guide management and assessment of metapopulation viability of this vulpid subspecies, while the exploratory data analysis and model will also be valuable to understand mange in other, particularly den-occupying, species.

Ex vivo bovine liver nonlinear viscoelastic properties: MR elastography and rheological measurements.

INTRODUCTION: Knowledge of the nonlinear viscoelastic properties of the liver is important, but the complex tissue behavior outside the linear viscoelastic regime has impeded their characterization, particularly in vivo. Combining static compression with magnetic resonance (MR) elastography has the potential to be a useful imaging method for assessing large deformation mechanical properties of soft tissues in vivo. However, this remains to be verified. Therefore this study aims first to determine whether MR elastography can measure the nonlinear mechanical properties of ex vivo bovine liver tissue under varying levels of uniform and focal preloads (up to 30%), and second to compare MR elastography-derived complex shear modulus with standard rheological measurements. METHOD: Nine fresh bovine livers were collected from a local abattoir, and experiments were conducted within 12hr of death. Two cubic samples (∼10 × 10 × 10 cm3) were dissected from each liver and imaged using MR elastography (60 Hz) under 4 levels of uniform and focal preload (1, 10, 20, and 30% of sample width) to investigate the relationship between MR elastography-derived complex shear modulus (G∗) and the maximum principal Right Cauchy Green Strain (C11). Three tissue samples from each of the same 9 livers underwent oscillatory rheometry under the same 4 preloads (1, 10, 20, and 30% strain). MR elastography-derived complex shear modulus (G∗) from the uniform preload was validated against rheometry by fitting the frequency dependence of G∗ with a power-law and extrapolating rheometry-derived G∗ to 60 Hz. RESULTS: MR elastography-derived G∗ increased with increasing compressive large deformation strain, and followed a power-law curve (G∗ = 1.73 × C11-0.38, R2 = 0.96). Similarly, rheometry-derived G∗ at 1 Hz, increasing from 0.66 ± 1.03 kPa (1% strain) to 1.84 ± 1.65 kPa (30% strain, RM one-way ANOVA, P < 0.001), and the frequency dependence of G∗ followed a power-law with the exponent decreasing from 0.13 to 0.06 with increasing preload. MR elastography-derived G∗ was 1.4-3.1 times higher than the extrapolated rheometry-derived G∗ at 60 Hz, but the strain dependence was consistent between rheometry and MR elastography measurements. CONCLUSIONS: This study demonstrates that MR elastography can detect changes in ex vivo bovine liver complex shear modulus due to either uniform or focal preload and therefore can be a useful technique to characterize nonlinear viscoelastic properties of soft tissue, provided that strains applied to the tissue can be quantified. Although MR elastography could reliably characterize the strain dependence of the ex vivo bovine liver, MR elastography overestimated the complex shear modulus of the tissue compared to rheological measurements, particularly at lower preload (<10%). That is likely to be important in clinical hepatic MR elastography diagnosis studies if preload is not carefully considered. A limitation is the absence of overlapping frequency between rheometry and MR elastography for formal validation.

The effect of maxillary first and mandibular second premolar extractions on the posterior Bolton ratio.

INTRODUCTION: The anterior and overall Bolton ratios and their application in orthodontics are widely known. However, little has been reported about the posterior Bolton ratio, how it is affected by the extraction of posterior teeth, and its application in orthodontic treatment planning. This study aimed to investigate how extracting maxillary first and mandibular second premolars affects the posterior Bolton ratio. METHODS: The sample included 55 patients with Class I occlusion within 1 standard deviation of ideal anterior and overall Bolton ratios. The digitized models were subjected to virtual extraction of maxillary first premolars and mandibular second premolars and setup of posterior teeth in ideal occlusion. If space closure compromised occlusion, the teeth were moved to achieve ideal cusp-fossa or cusp-marginal ridge occlusion. The ideal setups were measured for residual interproximal spacing. Statistical analysis used R statistical software (version 2018; R Core Team, Vienna, Austria). RESULTS: The ideal nonextraction posterior Bolton ratio was determined from the sample to be 105.77 ± 1.99%. The ideal expected posterior Bolton ratio for maxillary first and mandibular second premolar extraction patients was 106.52 ± 2.52%. This significantly differed from the expected posterior Bolton ratio for the 4 first premolar extractions. Patients finished with an average of 1.28 mm net residual spacing between mandibular first premolars and first molars; 38.2% of patients finished with at least 1.5 mm of residual space, and 9.1% of patients finished with at least 2 mm of residual space. CONCLUSIONS: A patient with ideal anterior, posterior, and overall Bolton ratios treated with maxillary first and mandibular second premolar extractions to ideal occlusion will likely finish with some spacing in the mandibular dentition.

Evaluation of enamel thickness of mandibular incisors

ABSTRACT Objective: To measure enamel thickness at the proximal surfaces of the mandibular incisors, using micro-computed tomography (micro-CT) scans. Material and Methods: Forty-one single-rooted mandibular incisors were selected and analyzed according to anatomical characteristics, to form three groups: Group 1 - central incisors (n = 18); Group 2 - right lateral incisors (n = 10); and Group 3 - left lateral incisors (n = 13). First, enamel thickness at the proximal contact areas of the mandibular incisors was measured. Second, the mesial and distal surfaces of the lateral incisors were compared. Finally, the relationship between the tooth width and the mean enamel thickness was determined. Each tooth was scanned with a micro-CT scanner, and the image was processed with SCANCO micro-CT onboard analysis software. Results: There were no statistically significant differences in mean enamel thickness between the mesial and distal surfaces for each lateral incisor, or between contralateral lateral incisors. In all surfaces analyzed, the upper zones had statistically significantly thinner enamel (0.52 ± 0.10 mm) when compared to the middle and lower zones (0.60 ± 0.08 mm and 0.59 ± 0.08 mm, respectively). There was no correlation (r =0.07) between enamel thickness of the mandibular incisor and the tooth width. Conclusions: The enamel thickness of the mandibular incisors is similar on the mesial and distal surfaces, with the thinnest layer located at the upper zone.

RESUMO Objetivo: Medir a espessura do esmalte nas superfícies proximais dos incisivos inferiores, usando imagens de microtomografia computadorizada (micro-CT). Material e Métodos: Quarenta e um incisivos inferiores com raiz única foram selecionados e analisados de acordo com as características anatômicas, formando três grupos: Grupo 1 - incisivos centrais (n = 18); Grupo 2 - incisivos laterais direitos (n = 10); e Grupo 3 - incisivos laterais esquerdos (n = 13). Primeiro, foi medida a espessura do esmalte nas áreas de contato proximal dos incisivos inferiores. Em segundo lugar, as faces mesial e distal dos incisivos laterais foram comparadas. Por fim, foi determinada a relação entre a largura do dente e a espessura média do esmalte. Cada dente foi escaneado com um scanner micro-CT, e a imagem foi processada com o software de análise SCANCO micro-CT. Resultados: Não houve diferenças estatisticamente significativas na espessura média do esmalte entre as superfícies mesial e distal de cada incisivo lateral, ou entre os incisivos laterais contralaterais. Em todas as superfícies analisadas, as zonas superiores apresentaram esmalte significativamente mais fino (0,52 ± 0,10 mm) quando comparadas às zonas média e inferior (0,60 ± 0,08 mm e 0,59 ± 0,08 mm, respectivamente). Não houve correlação (r = 0,07) entre a espessura do esmalte do incisivo inferior e a largura do dente. Conclusões: A espessura do esmalte dos incisivos inferiores é semelhante nas faces mesial e distal, com a camada mais fina localizada na zona superior.

Federated learning enables big data for rare cancer boundary detection.

Although machine learning (ML) has shown promise across disciplines, out-of-sample generalizability is concerning. This is currently addressed by sharing multi-site data, but such centralization is challenging/infeasible to scale due to various limitations. Federated ML (FL) provides an alternative paradigm for accurate and generalizable ML, by only sharing numerical model updates. Here we present the largest FL study to-date, involving data from 71 sites across 6 continents, to generate an automatic tumor boundary detector for the rare disease of glioblastoma, reporting the largest such dataset in the literature (n = 6, 314). We demonstrate a 33% delineation improvement for the surgically targetable tumor, and 23% for the complete tumor extent, over a publicly trained model. We anticipate our study to: 1) enable more healthcare studies informed by large diverse data, ensuring meaningful results for rare diseases and underrepresented populations, 2) facilitate further analyses for glioblastoma by releasing our consensus model, and 3) demonstrate the FL effectiveness at such scale and task-complexity as a paradigm shift for multi-site collaborations, alleviating the need for data-sharing.

OpenFL: the open federated learning library.

Objective.Federated learning (FL) is a computational paradigm that enables organizations to collaborate on machine learning (ML) and deep learning (DL) projects without sharing sensitive data, such as patient records, financial data, or classified secrets.Approach.Open federated learning (OpenFL) framework is an open-source python-based tool for training ML/DL algorithms using the data-private collaborative learning paradigm of FL, irrespective of the use case. OpenFL works with training pipelines built with both TensorFlow and PyTorch, and can be easily extended to other ML and DL frameworks.Main results.In this manuscript, we present OpenFL and summarize its motivation and development characteristics, with the intention of facilitating its application to existing ML/DL model training in a production environment. We further provide recommendations to secure a federation using trusted execution environments to ensure explicit model security and integrity, as well as maintain data confidentiality. Finally, we describe the first real-world healthcare federations that use the OpenFL library, and highlight how it can be applied to other non-healthcare use cases.Significance.The OpenFL library is designed for real world scalability, trusted execution, and also prioritizes easy migration of centralized ML models into a federated training pipeline. Although OpenFL's initial use case was in healthcare, it is applicable beyond this domain and is now reaching wider adoption both in research and production settings. The tool is open-sourced atgithub.com/intel/openfl.

The federated tumor segmentation (FeTS) tool: an open-source solution to further solid tumor research.

Objective.De-centralized data analysis becomes an increasingly preferred option in the healthcare domain, as it alleviates the need for sharing primary patient data across collaborating institutions. This highlights the need for consistent harmonized data curation, pre-processing, and identification of regions of interest based on uniform criteria.Approach.Towards this end, this manuscript describes theFederatedTumorSegmentation (FeTS) tool, in terms of software architecture and functionality.Main results.The primary aim of the FeTS tool is to facilitate this harmonized processing and the generation of gold standard reference labels for tumor sub-compartments on brain magnetic resonance imaging, and further enable federated training of a tumor sub-compartment delineation model across numerous sites distributed across the globe, without the need to share patient data.Significance.Building upon existing open-source tools such as the Insight Toolkit and Qt, the FeTS tool is designed to enable training deep learning models targeting tumor delineation in either centralized or federated settings. The target audience of the FeTS tool is primarily the computational researcher interested in developing federated learning models, and interested in joining a global federation towards this effort. The tool is open sourced athttps://github.com/FETS-AI/Front-End.

Host species and environment drivers of ectoparasite community of rodents in a Mojave Desert wetlands.

Drivers of patterns of ectoparasitism in rodents in patchy Mojave Desert wetlands were investigated. A total of 1,571 ectoparasites in Mesostigmata, Trombidiformes, Siphonaptera and Ixodida were collected from 341 rodents (Microtus californicus scirpensis, Mus musculus, Reithrodontomys megalotis, Peromyscus eremicus, and Neotoma lepida) at eleven marshes. Trombiculids accounted for 82.5% of mites, followed by the mesostigmatid Ornithonyssus bacoti (17.5%), with chiggers predominating on voles and harvest mice. There were at least three genera of chiggers (Eutrombicula alfreddugesi, Euschoengastia sp. novel, and Blankaartia sp. novel). Fleas included Orchopeas leucopus (90.3% of all fleas) and O. sexdentatus (9.7%), and ticks were the novel endemic Ixodes mojavensis (82.1% of ticks) and Dermacentor similis (17.9%). On all hosts and at all marshes, coverage-based rarefaction sampling was over 96%, indicating coverage sufficient for analysis. Dissimilarities in ectoparasite community structure were driven mainly by chiggers, I. mojavensis and O. leucopus. Northern marshes were dominated by chiggers; central marshes by I. mojavensis; and southern marshes by O. leucopus. Primary determinants of ectoparasite community structure were host species, patch size, and parasite interspecific interactions. Host species richness and environmental factors such as patch distance and water and plant availability were not significantly associated with patterns of ectoparasitism. There were nine (60%) significant negative pairwise associations between ectoparasite taxa and no significant positive relationships. Ixodes mojavensis had the highest number of negative associations (with five other species), followed by chiggers and O. bacoti with two negative associations each. The study area is among the most arid in North America and supports numerous rare and endemic species in increasingly isolated wetland habitat patches; knowledge of ectoparasite ecology in this region identifies potential ectoparasite vectors, and provides information needed to design and implement programs to manage vector-borne diseases for purposes of wildlife conservation.

PARASITES OF AN ENDANGERED HARVEST MOUSE (REITHRODONTOMYS RAVIVENTRIS HALICOETES) IN A NORTHERN CALIFORNIA MARSH.

Disease may limit recovery of endangered species. We surveyed parasites in the federally endangered salt marsh harvest mouse (SMHM; Reithrodontomys raviventris halicoetes) and sympatric rodents in Suisun Marsh (Solano County, California, USA) from April 2018 through March 2019. We investigated individual SMHM risk factors (age, sex, reproductive status, and body condition) for infection and relationships among the estimated parasite prevalence and season and habitat management (natural tidal habitats versus diked, nontidal habitats). We captured 625 individual rodents, including 439 SMHM, and tested these for infection with Bartonella spp., Borrelia spp., Rickettsia spp., Francisella tularensis, Leptospira spp., Cryptosporidium spp., Giardia spp., and Toxoplasma gondii by PCR. Over one-third (34.6%, confidence interval [CI], 30.2-39.3%) of SMHM tested positive for at least one parasite. Four percent (CI, 2.8-6.3%) of SMHM were infected with F. tularensis holarctica, a virulent bacterium that causes mortality in rodents shortly after infection. Additionally, we detected three species of Bartonella (B. henselae, B. rochalimae, B. vinsonii arupensis), Leptospira borgpetersenii serovar Ballum, Cryptosporidium sp. (deer mouse [Peromyscus maniculatus] genotype), Cryptosporidium parvum, Giardia intestinalis, and an unidentified Borrelia sp. The only parasite that was associated with habitat management was Bartonella spp., which was more prevalent in diked than tidal areas. Male SMHM were more likely to be parasitized than females, and individuals in modestly poor body condition were most likely to be infected with Bartonella spp. The estimated sample prevalence of multiple parasites varied by season and by host species. This is the first major parasite assessment in a long-endangered species, and these results will assist managers to incorporate parasitic disease into recovery planning and provide a critical baseline for future investigations, including how climatically induced habitat and species composition changes could alter disease dynamics.

Diversity of rickettsiae in domestic, synanthropic, and sylvatic mammals and their ectoparasites in a spotted fever-epidemic region at the western US-Mexico border.

Over one hundred cases of human rickettsiosis, many fatal, are reported annually across the US-Mexico transboundary region, representing a likely undercount. Although cases are often attributed to Rickettsia rickettsii, the agent of Rocky Mountain spotted fever, multiple other Rickettsia pathogens are present in North America. We conducted multiple-host surveillance of domestic, synanthropic, and sylvatic mammals and their ectoparasites to investigate the ecology of Rickettsia species in this region. A total of 499 mammals, including 83 dogs, 23 wild carnivores, five lagomorphs, and 388 rodents were sampled, and 413 fleas and 447 ticks belonging to 15 and 4 species, respectively, were collected during 2017 and 2018. We detected Rickettsia spp. DNA in one blood sample of coyote (Canis latrans), 11 ear tissues of rodents (10.6%), and 79 ectoparasites (9.5%). Of the 64 Rickettsia-positive fleas, 54 were Echidnophaga gallinacea and 10 were Pulex simulans, while of the 15 ticks, 11 were Rhipicephalus sanguineus s.l. and four Ixodes pacificus. The DNA sequence alignment of gltA and ompB regions revealed one and ten genetic variants of Rickettsia spp., respectively. These variants were clustered in clades of zoonotic species (R. felis, R. massiliae, R. parkeri, R. rickettsii, and R. typhi) and organisms of unknown pathogenic significance (R. asembonensis and Candidatus Rickettsia tarasevichiae). The finding of a coyote infected with R. rickettsii and the multiple zoonotic SFG rickettsial agents in the study area suggest that: 1) wild canids could serve as an amplifying host for RMSF, an alternate host for Rh. sanguineus s.l. ticks, and a means to spread infection and ticks over large areas; and 2) at least some of the human rickettsiosis cases attributed to R. rickettsii could be caused by other Rickettsia species. This study strongly supports the importance of multiple-host and vector eco-epidemiological studies and the One Health approach to better understand disease in a RMSF-epidemic region.

Comparative assessment of relapse and failure between CAD/CAM stainless steel and standard stainless steel fixed retainers in orthodontic retention patients.

OBJECTIVES: To compare relapse and failure rates of computer-aided design/computer-aided manufacturing (CAD/CAM) and standard fixed retainers. MATERIALS AND METHODS: This single-center, single-blinded, prospective randomized clinical trial included 46 patients who completed active orthodontic treatment and complied with retention visits. The patients were randomly assigned to three groups: CAD/CAM group with multistranded stainless steel wires (CAD/CAM, n = 16), Lab group with the same multistranded wires (lab, n = 16), and control group with stainless steel Ortho-FlexTech wires (traditional, n = 14). Intraoral scans were obtained at placement of fixed retainers (T1), 3-month visit (T2), and 6-month visit (T3) and measured for intercanine width and Little's Irregularity Index. Failures were recorded. RESULTS: The CAD/CAM group experienced less intercanine width decrease than the traditional group at 3 months (mean difference, 0.83 ± 0.16 mm; 95% confidence interval [CI], 0.44-1.22; P < .001) and 6 months (mean difference, 1.23 ± 0.40 mm; 95% CI, 0.19-2.27; P < .05). The CAD/CAM group experienced less increase in Little's Irregularity Index compared with the lab group within 3 months (mean difference, 0.81 ± 0.27 mm; 95% CI, 0.12-1.49; P < .05). Failures from greatest to least were experienced by the lab group (43.8%), the CAD/CAM group (25%), and the traditional group (14.3%). CONCLUSIONS: Within 6 months of bonding fixed retainers, CAD/CAM fixed retainers showed less relapse than lab-based and traditional chairside retainers and less failures than lab-based retainers.

Host species and environment drivers of ectoparasite community of rodents in a Mojave Desert wetlands

Drivers of patterns of ectoparasitism in rodents in patchy Mojave Desert wetlands were investigated. A total of 1,571 ectoparasites in Mesostigmata, Trombidiformes, Siphonaptera and Ixodida were collected from 341 rodents (Microtus californicus scirpensis, Mus musculus, Reithrodontomys megalotis, Peromyscus eremicus, and Neotoma lepida) at eleven marshes. Trombiculids accounted for 82.5% of mites, followed by the mesostigmatid Ornithonyssus bacoti (17.5%), with chiggers predominating on voles and harvest mice. There were at least three genera of chiggers (Eutrombicula alfreddugesi, Euschoengastia sp. novel, and Blankaartia sp. novel). Fleas included Orchopeas leucopus (90.3% of all fleas) and O. sexdentatus (9.7%), and ticks were the novel endemic Ixodes mojavensis (82.1% of ticks) and Dermacentor similis (17.9%). On all hosts and at all marshes, coverage-based rarefaction sampling was over 96%, indicating coverage sufficient for analysis. Dissimilarities in ectoparasite community structure were driven mainly by chiggers, I. mojavensis and O. leucopus. Northern marshes were dominated by chiggers; central marshes by I. mojavensis; and southern marshes by O. leucopus. Primary determinants of ectoparasite community structure were host species, patch size, and parasite interspecific interactions. Host species richness and environmental factors such as patch distance and water and plant availability were not significantly associated with patterns of ectoparasitism. There were nine (60%) significant negative pairwise associations between ectoparasite taxa and no significant positive relationships. Ixodes mojavensis had the highest number of negative associations (with five other species), followed by chiggers and O. bacoti with two negative associations each. The study area is among the most arid in North America and supports numerous rare and endemic species in increasingly isolated wetland habitat patches; knowledge of ectoparasite ecology in this region identifies potential ectoparasite vectors, and provides information needed to design and implement programs to manage vector-borne diseases for purposes of wildlife conservation.

The effect of 4 first premolar extractions on the posterior Bolton ratio.

INTRODUCTION: Overall and anterior Bolton ratios have been well covered in the orthodontic literature; however, little has been reported on posterior Bolton ratios. Considering the frequency of premolar extractions in the specialty, it would be relevant to know how the posterior occlusion is affected by premolar extractions. This study aimed to investigate how the posterior Bolton ratio is affected by the extraction of the 4 first premolars. METHODS: Fifty-five patients with Class I occlusion within 1 standard deviation of ideal anterior and overall Bolton ratios models were selected and digitized. Tooth widths were measured. Virtual extractions of 4 first premolars were performed, and a digital setup of anterior and remaining posterior teeth observing ideal occlusion relationships was executed. When space closure compromised the occlusion, preference was given to the latter. Residual interproximal spacing was digitally measured on the setups. Analysis of variance and linear regression tests were used to identify factors contributing to interproximal spacing. RESULTS: An average of 1.1 mm of net residual spacing between mandibular second premolars and first molars was observed. In 27% of the sample, at least 1.5 mm of residual space was found. In addition, 16% showed at least 2 mm of residual space. The ratio of the maxillary second premolars to the mandibular second premolars and the width of the maxillary second premolars best explain residual space (r = 0.554; r2 = 0.307). A regression equation for predicting residual space is offered. CONCLUSIONS: Ideal anterior, posterior, and overall Bolton ratios treated with extraction of 4 first premolars and ideal occlusion will likely finish with some spacing in the mandible.